Description

• Versatile clear sealer for cement and concrete surfaces
• Excellent penetration into powdery surfaces
• Combined good alkali resistance with excellent sealing properties

Unique in that it can be over painted by either
GLOSS ENAMELS or EMULSION PAINTS.

USES

• Recommended as sealer for new dry interior and exterior surfaces
• Apply to gypsum, plaster, brick, cement, hardboard etc.
• Suitable for penetrating and binding of chalked, but sound PVA or Lime surfaces
• Also used as DAMP CONTROL SEALER

APPLICATION

• Ready for use with brush or roller. For better penetration, brush application is preferred
• New plaster must be completely dry
• Lime wash must be removed by wire brush and sandpaper
• All loose and flaking paint must be removed
• Apply a single coat

TECHNICAL DATA

TYPE: MODIFIED STYRENE ACRYLIC
DRYING TIME: SURFACE – 4 HOURS, HARD – 12 HOURS
VISCOSITY: 18 – 20 SEC F4
SG: 0.820 – 0.840
RE-COAT TIME: 12 HOURS
SPREADING RATE: 1ST COAT/POROUS SUBSTRATES, 8 – 12 sq/m/lt, VERY SUBSTRATE DEPENDENT
THINNER: MINERAL TURPS