Description

• STAR WOOD COAT is a single pack acid-catalysed wood finish which dries to a very hard scratch resistant finish
• It dries to a beautiful nonslip eggshell finish with a waxed feel and look
• Resistant to marring, house hold stains and beverages, cold and hot water
• Very easy to apply with good flow properties
• Enhances the grain of the wood
• Ensures a professional finish

USES

• Used as an interior wood floor coating
• Recommended for all interior wooden surfaces
• Used for furniture, bar and table tops, wall panelling

APPLICATION

• Supplied ready for use with brush. For spray application, add 10% Lacquer Thinner. Spray at low pressure
• Remove all old wax and polish with power sander. Apply one coat. Allow to dry for 2-3 hours. Sand lightly with 220 grid sand paper. Apply 2nd liberal coat
  In areas where hard wear is expected apply 3rd coat
• On exceptionally hard wood with poor penetration apply 1 or two coats only
• Previously painted or varnished surfaces must be stripped
  VENTILATE AREA DURING AND AFTER APPLICATION. DO NOT SMOKE OR INHALE FUMES

TECHNICAL DATA

TYPE: ACID CATALYSED CLEAR
DRYING TIME: SURFACE 2 HOURS, HARD 4 HOURS
RE-COAT TIME: 4 HOURS
SPREADING RATE: 1ST COAT/POROUS SUBSTRATES, 8 – 10 sq/m/lt.
SPREADING RATE: 2ND COAT/SEALED SUBSTRATES, 10 – 12 sq/m/lt.
THINNER: LACQUER THINNER