Description

• Versatile sealer for cement and concrete surfaces
• Excellent penetration into powdery surfaces
• Combined good alkali resistance with excellent sealing properties
• Unique in that it can be over coated with either GLOSS ENAMELS or EMULSION PAINTS

COLOUR RANGE

• UMS 09 Clear
• UMS 82 Pale Cream
• UMS 99 White

USES

• Recommended as sealer for new dry interior and exterior surfaces
• Apply to gypsum, plaster, brick, cement, hardboard etc.
• Suitable for penetrating and binding of chalked, but sound PVA or Lime surfaces
• Used as DAMP CONTROL SEALER where dampness causes blistering

APPLICATION

• Remove all loose and flaking paint. Lime wash must be removed by wire brush and scraping
• New plaster must be completely dry
• Ready for use with brush or roller. For better penetration brush application is preferred
• Where fungi or algae present treat with SWP 09 ALGI-CLEAN
• Apply a single coat
• Thin with Mineral Turps + 5% if required

TECHNICAL DATA

TYPE: MODIFIED STYRENE ACRYLIC
DRYING TIME: SURFACE – 2 HOURS, HARD – 6 HOURS
VISCOSITY: 75 – 78KU’S
SG: 1.300 – 1.320
RE-COAT TIME: 12 HOURS
SPREADING RATE: 1ST COAT/POROUS SUBSTRATES, 6 – 8 sq/m/lt.
THINNER: MINERAL TURPS