Description

• Quick drying road marking paint with excellent road service
• Suitable for use on bitumen and concrete. Available in standard grade and reflectorised for night visibility.(Drop on glass beads)
• Meets SABS requirements

COLOUR RANGE

• Yellow
• White
• Red
• Black

USES

• Star Road Marking Paint can be used for marking bituminous/tar, asphalt and concrete surfaces. Because of its quick drying nature it can be used as an excellent barrier coat, eliminating bleeding and discolouration from previous coats

APPLICATION

• The surface to be coated must be clean, free from dirt, dust, oil and grease etc. Apply one or two coats of Star Road Marking Paint and leave to dry for as long as is practically possible. It must be noted that the longer the paint is allowed to dry and the rougher the surface to be coated, the longer the paint will last. The paint will be touch dry within +3-5 minutes. This product can be applied directly to all clean, new or previously painted roads

TECHNICAL DATA

TYPE: MODIFIED ALKYD
DRYING TIME: NO PICK UP 20 MINS. HARD – 45 MINS
VISCOSITY: 80-90 KU
MASS PER LITRE: 1.28-1.32
VOLUME SOLIDS: 45-48%
MASS SOLIDS: 65-68%
RE-COAT TIME: SINGLE COAT
SPREADING RATE: 1ST COAT/POROUS SUBSTRATES, 3 – 5 sq/m/lt.
SPREADING RATE: 2ND COAT/SEALED SUBSTRATES, 12 – 14 sq/m/lt.
FILM THICKNESS: NEW SURFACE 175 MICRON WET
RECOMMENDED: 70 MICRON DRY
REPAINT: 75 MICRON WET, 30 MICRON DRY
THINNER: ROAD MARKING THINNER