Description

• Versatile Emulsion based roof paint with good adhesion to new galvanised iron, asbestos, cement and roof tiles
• Re-coat after 3 hours enabling two coats to be applied the same day
• Ready for use with brush or roller
• Special rollers are available for galvanised roofs

COLOUR RANGE

• Red, Brown, Black, Terra Cotta, Green, Burgundy, Blue
• Special colours tinted on request

USES

• Applied to galvanised iron, asbestos, cement and tile roofs
• Also used on garage doors, gutters and asbestos cement flower pots

APPLICATION

OLD WEATHERED GALVANISED IRON ROOF:

• Remove old flaking paint and rust with wire brush
• Prime bare patches with AQUAPHOS PRIMER
• Apply 2 coats ACRYLIC ROOF PAINT

NEW GALVANISED IRON ROOF:

• Remove manufacturer’s protective coating with GALVANISED IRON CLEANER
• Apply two coats ACRYLIC ROOF PAINT

PREVIOUSLY PAINTED CEMENT TILE ROOF:

• Remove all dirt and algae growths apply one coat ACRYLIC ROOF PAINT

NEW CEMENT TILE ROOFS:

• Wet surface with clean tap water then apply two coats ACRYLIC ROOF PAINT

NOTE

• Prepare your surfaces well
• Ensure your substrate is entirely dry before painting
• Always “box” tinted paints
• STIR THOROUGHLY with a paddle NOT a round stick

GUARANTEE

• 10 Years

COLOUR CHIPS

EXAMPLES

TECHNICAL DATA

TYPE: PURE ACRYLIC
DRYING TIME: SURFACE – 45 MINS, HARD – 3 HOURS
VISCOSITY: 85 – 90KU’S
SG: 1.320 – 1.340
RE-COAT TIME: 3 HOURS
SPREADING RATE: 1ST COAT/POROUS SUBSTRATES, 6 – 8 sq/m/lt.
SPREADING RATE: 2ND COAT/SEALED SUBSTRATES, 6 – 10 sq/m/lt.
VOLUME SOLIDS: 30 – 34%
MASS SOLIDS: 46 – 50%
THINNER: WATER